warm stone

Eugene, Eugenijus Bernotas

I am a professional Fireplace master that builds custom outside/inside fireplaces. I have been building fireplaces for over 20 years.
If you need a Fireplace built, restored or you have any queries do not hesitate to contact me.

Latest Projects:

Outdoor Fireplace - "Marmina" 2011

  • Fireplace with stove (granite base fireplace with a stove)
  • Polished granite table with stainless steel doors (used for storing skewers, barbecue grill, and other cooking tools)
  • To the left of the fireplace there is a stove (wood fired stove)
  • The stove is separate from the fireplace but uses the same chimney
  • All the metalwork was done by blacksmiths using stainless steel
  • The stove doors were made out of cast iron.
  •  Project took 3.5 - 4 months

Indoor Fireplace - "Redman" 2011

  • Corner style fireplace with  a capsule
  • Air flow that goes through filters from outside with an integrated fan
  • Fireplace heats 150m2 (square meters)
  • Finish:
    • Granite was used on the floor
    • Capsule has a granite finish
  • The chimney was partially rebuilt
  • Project took 2 months

Hanging fireplace with an airflow system - 2011

  • Polished granite goes all around the capsule
  • Granite was used on the floor
  • Air flow that goes through filters from outside with an integrated fan
  • The chimney was repaired and partially rebuilt
  • Finish - plaster
  • This project took 1.5 months
  • This was a restoration and repair project

Outside fireplace with a glass side - 2011

  • Heat resistant ceramic glass
  • The upper shell was made by blacksmiths (a double stainless steel wall)
  • Polished granite
  • Finish - stone imitation (special tiles were used to achieve this - bricklaying of concrete bricks and covered by tiles)
  • Project took 3 months

Corner style fireplace with a capsule - 2010

  • Air flow that goes through filters from outside with an integrated fan
  • 2 different colour granites were used in this project
  • Heats 100m2
  • Project took 1.5 months

Corner style fireplace with a capsule - 2007

  • Heats 100m2
  • Air flow that goes through filters from outside with an integrated fan. The air is distributed throughout the whole house for a constant flow of fresh air
  • Used polished granite and decorative bricks
  • The floor was tiled (the fireplace stands on the tiles)
  • The chimney was rebuilt
  • Project took 1.5 months

Indoor Fireplace - "Eugenijus" 2007

  • Open fireplace with doors made by blacksmiths
  • Air flow that goes through filters from outside with an integrated fan. The air is distributed throughout the whole house for a constant flow of fresh air.
  • Used polished granite (polished granite was also used on the floor)
  • From one side of the fireplace there are shelves made from polished granite
  • Finish – mosaic (made from chopped and cut granite – thickness 50mm)
  • The chimney was completely rebuilt
  • Project took 3.5 months

Fireplace with a capsule and brown granite finish - 2006

  • Finish
    • Capsule has a brown granite finish
    • Granite was used on the floor
  • Heats 150m2
  • Air flow that goes through filters from outside with an integrated fan
  • Tools were made by blacksmiths
  • Project took 2 months

Open fireplace with doors - 2006

  • Doors are made out of glass - bird wings made out of yellow glass base and black glass, the wing tips are finished with agate stone
  • This project was a fireplace restoration project (the inside of the fireplace was taken apart and rebuilt, the chimney was partially rebuilt)
  • The door metal work was done by blacksmiths
  • Project took 1.5 months